At present, the lean tube workbench has been widely used in various industries, and its use has brought many conveniences for enterprise production. The lean tube workbench can be independent, assembled, and adjusted easily. It can be designed and assembled freely according to the needs of workshop production. It is suitable for testing, maintenance, and product assembly in various industries; Make the factory cleaner, the production arrangement easier and the logistics smoother. For the design of the lean tube workbench, lean tube manufacturers will first consider the load capacity when designing to ensure that the workbench will not collapse when in use.
In the design of the lean pipe workbench, the load capacity should be considered first, and the strength can be increased by adding fulcrums, connectors and using two plastic coated pipes in parallel. When designing the structure, confirm that the main load is directly acting on the pipe fittings rather than on the connecting pieces. The large horizontal distance shall be supported by vertical columns perpendicular to the ground every 600mm, and the vertical columns shall be directly to the ground every 1200mm.
For products with caster wheels, the bottom of the shelf shall be of double pole parallel structure. The horizontal distance is 600mm, and the safety bearing of a single bar and slide is 30kg. A plastic coated pipe as a whole is stronger than several plastic coated pipes connected in series by chucks, so when selecting plastic coated pipes, the stressed rod must be a whole, and the connecting rod can be segmented. The width (center distance) of each column of the sliding shelf is the width of the turnover box placed 60mm. The height of each floor is 50mm for the turnover box placed.
The above are the key points of lean tube workbench design shared by lean tube manufacturers. Before design, we should understand customers’ needs, and then design and assemble according to requirements to ensure that the lean tube products produced can bring convenience to enterprise production. If you need this product, you can contact us directly. WJ-LEAN has many years of metal processing experience. If you need logistics containers, storage shelves, handling equipment and other products, you can consult. We look forward to cooperating with you.
Post time: Dec-02-2022
