Lean tube(https://www.wj-lean.com/tube/) products can be designed according to the site conditions and the requirements of customers. They can be disassembled flexibly without welding. The lean pipe assembly joint(https://www.wj-lean.com/metal-joint/) can be used to assemble various shape and structure instruments such as assembly lines, workbenches, turnover vehicles, storage shelves, etc. It is widely used in various production links such as automobile industry, electronic manufacturing, communication industry, bioengineering, precision hardware, etc. After the lean tube has been used for a period of time, its guide rail and box strip have some wear, so how to reduce the wear rate in the process of using lean tube?
If the lean pipe shakes obviously when working, adjust the lean pipe box bar. The position of the box bar is generally under the workbench, together with the slider. The journey of the lean tube should be changed frequently. Don’t use one place all the time. Otherwise, the guide rail of the lean tube will be badly worn over time.
2. The crate of lean tube is located under the workbench. It is necessary to take out the crate frequently to scrub and clean the oil stain inside. The crate should not be adjusted too tightly. This will increase the amount of wear, and the lean pipe should always add lubricating oil, especially the position of guide rail, dovetail groove and lead screw!
When Lean Pipe arrives at your company, clean the metal guide surface and lead screw of Lean Pipe with clean cotton cloth such as gasoline, and then apply machine tool lubricating oil. Before using Lean Pipe every day, inject lubricating oil into the hand wheel of Lean Pipe to ensure the cleanness of the machine tool guide rail as much as possible. Clean the iron pin on the Lean Pipe workbench before work, and be sure to keep it clean.
The above is WJ-LEAN’s knowledge about lean pipe’s maintenance shared with you today. We hope it can help you after reading it.
Post time: Jan-13-2023
