Lean tube productscan be used to transport materials, and the variety of materials transported and the structural forms are diverse. In addition to ordinary materials, they can also meet the requirements of oil resistance, heat resistance, corrosion resistance, anti-static and other materials with special requirements. It is often used to transport scattered small parts and articles with weight less than 100KG. And it has the characteristics of lightweight, strong, flexible disassembly and assembly, and low cost, so it is more and more popular in various industries, but we pay little attention to the production and maintenance of the lean tube workbench, so this is a major reason for its shortened life. An enterprise buys it to create higher value for us, so how to do a good job of its maintenance is the key. Now WJ-LEAN will teach you how to maintain the lean tube workbench.
1. The workbench shall be handled with care during use, and the lean tube workbench shall not be damaged by collision.
2.Once the worktable is assembled, do not disassemble it frequently, which may cause instability of the lean pipe workbench and reduce the working time of the worktable.
3. Do not stand on the table or allow it to bear more than its rated load. According to the actual use, the primary filter shall be removed and cleaned regularly, and the cleaning cycle is generally 3-6 months.
4. Do not place acidic and oily objects on the surface of the worktable to avoid corrosion of the tabletop of the lean tube worktable and affect its normal use. The lean tube workbench shall be placed on a relatively flat ground and a relatively dry place to increase the service life of the workbench.
5. Pay attention to cleaning during the use of the lean tube workbench. When the lean tube workbench can not reach the ideal cross section wind speed after normal replacement or cleaning of the primary air filter, the working voltage of the fan (turn the knob) should be adjusted to achieve the ideal uniform wind speed.
6. Keep the surface of the lean tube worktable smooth and clean. Do not place sharp tools or objects to avoid scratching the table top of the lean tube worktable.
WJ-LEAN reminds you to pay attention to the maintenance of the workbench. Because if the lean tube workbench does not pay attention to maintenance, it will directly shorten its service life and cannot create more beneficial value for the enterprise.
Post time: Mar-10-2023
